In no fixed wall cabinet shelves, so it is especially easy to change the height. To do this, you ju

Wall cabinets are placed at eye level. They were the first in the kitchen, to which people pay attention. The presented project in the bedroom hinged cupboard for making their own hands as the perfect fit Cupboards. We provide overhead door cabinets with raised panels, but you can choose a different style. Hinged cupboard width is 45.7 cm, which is a standard and coincides with the width of the cabinet floor. List of materials for the manufacture of hinged cupboard provides just such a resolution. You can change the size of the cabinet, at its discretion. For example, you can reduce the size of the two cabinets to fit them over nadplitnoy hood.
In no fixed wall cabinet shelves, so it is especially easy to change the height. To do this, you just have to reduce its walls, the front frame and the door on the same amount. If you need to cancel a larger space, you can make the cabinet wider and hang it on the double door. In this case you have to add to the front frame of the central rack. Make it twice as wide as the side of the rack.
For the manufacture of the side walls hinged cupboard to be in sight, take plywood, hardwood, and for walls that are adjacent to other cabinets in the bedroom or wall, use fir plywood grade A-C. And for making such a cupboard you can use chipboard. Facial frames, doors and moldings in the bedroom on the edges should be made of solid hardwood, so they blend in with you are using hardwood plywood. Difficulty making hinged cupboard with his hands relatively high.
Roof (plywood, particle board) - 1.9 x 28.6 x 43.8 cm - 1 pc. Side walls (plywood, particle board) in the bedroom - 1.9 x 28.6 x 76.2 cm - 2 pcs. Bottom (plywood, particle board) - 1.9 x 27.9 x 43.8 cm - 1 pc. Shelves (plywood, particle board) - 1,9 26,0 41,3 cm - 2 pcs. The rear wall (plywood, particle board) - 0.6 x 43.8 x 75.2 cm - 1 pc. Cleat - 1.9 x 3.8 x 41.9 cm - 2 pcs. Racks - 1.9 x 3.8 x 27.9 cm - 2 pcs. Crossbar - 1.9 x 5.7 x 38.1 cm - 2 pcs. Lining the edges of the flanges (solid wood) - 1.9 x 1.9 x 41.3 cm - 2 pcs.
Connection of wood pieces into the grooves are longitudinal and transverse, they differ in the direction of the groove. Rebate wooden parts are most often used when connecting wall cabinets. Seam - a rectangular in the bedroom ledge on the edge of the board.
1. Manufacturing in the bedroom of parts. Cut the roof, walls, in the bedroom bottom, shelves and cabinet mounting strips in accordance with the dimensions given in the list of materials for the manufacture of the cabinet with his own hands. In the interior of the side walls of the slot drill pins as shown in Figure "Detail view of the side wall hinged cupboard."
2. Deciding grooves and folds in the side walls and roof. Select the side walls of the cabinet grooves and folds, as shown in Figure "Detail view of the side wall hinged cupboard." To ensure freedom of adjustment, and if the walls in your kitchen is not quite perfect, remember Infobud writes that the rebate for fixing the rear wall 3 mm wider than the thickness of plywood or chipboard. Notice in the figure that one side wall. Do not forget that the second wall hinged cupboard should be a mirror image of her.
3. Assembling the cabinet in the bedroom frame. Connect the bottom with the side walls by an adhesive and finishing nails 50 mm. Glue and nails connect mounting rail with the side walls, as shown in Figure "General view of the hinged cupboard."
4. Installation of the rear wall. Use a carpenter's square to make sure the rectangular body. Apply glue to the folds of the side walls and the roof and secure the rear wall 22 mm finishing nails.
5. Manufacturing and mounting racks and crossbars cabinet. Dimensions spokes listed in the list of materials for manufacturing the cabinet with his own hands, are chosen so that the rungs are flush with the side walls of the cabinet. This provides the best appearance separate hanging closet. However, if you master a series of cabinets, you should increase the length of the spokes on the 6 mm. As a result, the cross will be issued at 3 mm on each side of the cabinet, which is very convenient if slightly warped wall cabinets or wall in the kitchen is not too smooth. Cut the rack and attach them with glue 50mm finishing nails. Then cut cross to match the distance between the uprights, and attach them in the same way.
After installing the cabinet and hanging in the bedroom doors to make sure that it stands vertically and horizontally. Hanging cupboard doors before installation in the bedroom can lead to the fact that the door jam, if the cabinet will stand at an angle.
2. Manufacturing and hanging doors. The dimensions in the bedroom indicated in the list of materials that correspond to such door, which is superimposed in the bedroom on the cross member and the rack of 10 mm on each side. For hanging on a rack, attach the door a couple of overhead loops